 |
 |
0201
Allegro Respirator Fit-Check Banana Oil Ampules
Provides a fast, safe and easy method to perform qualitative respirator fit check. When activated, the ampules give off a non-irritating odor of banana oil (Iso Amyl Acetate). If banana odor is detected by the wearer, the respirator must be adjusted or replaced. 10 ampules per box.
|
|
   |
|
|
|
 |
|
1001
Allegro Respirator Cleaning Wipes, with Alcohol
Large (5" x 8"), individually foil-packaged towelettes contain 70% Isopropanol and are designed specifically for rubber respirator facepieces and other personal safety equipment. The box is designed as a wall mounted dispenser, or can be wall mounted using the box holder. 100 towelettes per box.
|
|
| |
|
|
|
 |
|
14110321
Willson Saf-T-Fit disposable N95 flat fold respirator with boomerang nose seal. Designed to maximize wearer comfort, fit, and compliance. Medium size, 50 per box. NIOSH 42 CFR 84 standards.
|
|
|
|
|
|
 |
|
2050
Allegro Standard Smoke Test Kit
For qualitative fit testing of air purifying respirators, this Smoke Test Kit offers everything needed for meeting OSHA’s protocol for fit testing with smoke. Includes irritant smoke tubes, aspirator assembly, and record form in a protective carry pouch.
|
|
| |
|
|
|
 |
|
2050-01
Replacement Smoke Tubes for Allegro Smoke Test Kit #2050 (6pcs/Box)
|
|
| |
|
|
|
 |
|
2200N95
Moldex basic disposable respirator, including standard strap. Features the Dura-Mesh(R) shell that protects the filter media. The contoured shape and soft foam nose flange helps alleviate pressure points for added comfort.
|
|
|
|
|
|
 |
|
2300N95
Moldex disposable respirator with exhalation valve, including standard strap. Features the Dura-Mesh(R) shell that protects the filter media. The contoured shape and soft foam nose flange helps alleviate pressure points for added comfort.
|
|
|
|
|
|
 |
|
3001
Allegro Alcohol Free Respirator Cleaning Wipes
For use on respirator facepieces where the manufacturer recommends using a non-alcohol cleaning wipe. Active ingredient: Benzalkonium Chloride. Will not harm even the most sensitive rubber facepieces. 100 towelettes per box.
|
|
| |
|
|
|
 |
|
30437FR
Nomex IIIA Respirator Carrying Pouch
|
|
|
|
|
|
 |
|
3M14-5701-10X
3M™ Fresh-air II Supplied Air/Cool-air System with 3M™ Speedglas™ Helmet 9000 and Auto-Darkening Filter 9000XF, 14-5701-10X Shade 10
NIOSH-approved supplied air (SA) 9000 respirator system. Lightweight belt-mounted valve permits welder to lower temperature of air entering headpiece by 45°F (25°C), ideal for hot, strenuous jobs.
Cool-air supplied air valve permits welder to lower air temperature up to 45°F (25°C). The 3M™ Speedglas™ 9000 HWR welding respirator headpiece accepts any 9000 or 9002 series ADF. The 3M™Speedglas™9000XF auto-darkening filter (ADF) features an extra large viewing area. Offered in shades 10, 11, or 12 (factory set) and a light shade of 3. Shade 5 off state for torch work. Sensitivity control dial.
|
|
|
|
|
|
 |
|
3M14-5701-12X
3M™ Fresh-air II Supplied Air/Cool-Air System with 3M™ Speedglas™ Helmet 9000 and Auto-Darkening Filter 9000XF, 14-5701-12X Shade 12
NIOSH-approved supplied air (SA) 9000 respirator system. Lightweight belt-mounted valve permits welder to lower temperature of air entering headpiece by 45°F (25°C), ideal for hot, strenuous jobs.
Cool-air supplied air valve permits welder to lower air temperature up to 45°F (25°C). The 3M™ Speedglas™ 9000 HWR welding respirator headpiece accepts any 9000 or 9002 series ADF. The 3M™Speedglas™9000XF auto-darkening filter (ADF) features an extra large viewing area. Offered in shades 10, 11, or 12 (factory set) and a light shade of 3. Shade 5 off state for torch work. Sensitivity control dial.
|
|
|
|
|
|
 |
|
3M14-5701-15
3M™ Fresh-Air II Supplied Air/Cool-Air System with 3M™ Speedglas™ Helmet 9000 and Auto-Darkening Filter 9002D, 14-5701-15
NIOSH-approved supplied air (SA) 9000 respirator system. Lightweight belt-mounted valve permits welder to lower temperature of air entering headpiece by 45°F (25°C), ideal for hot, strenuous jobs.
Cool-air supplied air valve permits welder to lower air temperature up to 45°F (25°C). The 3M™ Speedglas™ 9000 HWR welding respirator headpiece accepts any 9000 or 9002 series ADF. The 3M™Speedglas™9002D auto-darkening filter (ADF) offers two shades (10 and 11) with shade 3 light state. Shade 5 off state for torch work. High and low sensitivity settings.
|
|
|
|
|
|
 |
|
3M14-5701-15SW
3M™ Fresh-Air II Supplied Air/Cool-Air System with 3M™ Speedglas™ Helmet 9000, SideWindows and Auto-Darkening Filter 9002D, 14-5701-15SW
NIOSH-approved supplied air (SA) 9000 respirator system. Lightweight belt-mounted valve permits welder to lower temperature of air entering headpiece by 45°F (25°C), ideal for hot, strenuous jobs.
Cool-air supplied air valve permits welder to lower air temperature up to 45°F (25°C). The 3M™ Speedglas™ 9000 HWR welding respirator headpiece accepts any 9000 or 9002 series ADF. The 3M™ Speedglas™ 9002D auto-darkening filter (ADF) offers two shades (10 and 11) with shade 3 light state. Shade 5 off state for torch work. High and low sensitivity settings. SideWindows increas peripheral vision by over 100%.
|
|
|
|
|
|
 |
|
3M2091
3M P100 Hepa Filter. Use with 3M(tm) Facepieces 6000 Series or 3M(tm) Facepieces 7500 Series against a variety of gases, vapors and particulate hazards according to NIOSH approvals.
|
|
|
|
|
|
 |
|
3M2097
The 3M Particulate Filter, P100 has been developed with your respiratory needs in mind. Specially designed carbon layers help remove nuisance levels of organic vapors. Use with 3M Facepieces 6000 Series or 3M Facepieces 7000 Series with bayonet filter holders.
The 2097 is well suited for a wide range of oil and non-oil based particulate contaminants. Ideal for welding, metal pouring, torch cutting, abatement or as a prefilter for
certain chemical exposures.
|
|
|
|
|
|
 |
|
3M501
3M Retainer Prefilter.
Used to hold 3M™ Particulate Filters 5N11 and 5P71/07194(AAD) in place on top of 3M™ Respirators 5000 Series and 3M™ Cartridges 6000 Series.
|
|
|
|
|
|
 |
|
3M502
3M Filter Adapter
Use to attach 3M Particulate Filters 2000 Series and 7093 to the 3M Respirators 5000 Series and 3M Cartridges 6000 Series for a wide variety of applications.
|
|
|
|
|
|
 |
|
3M5N11
3M Particulate Filter, N95
NIOSH approved for environments containing certain non-oil based particles. Use with 3M™ Respirators 5000 Series or 3M™ Cartridges 6000 Series, and 3M™ Filter Retainer 501.
When properly fitted, use with appropriate cartridges for various applications including spray painting, petrochemical and chemical manufacturing, and pesticide spraying for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. Do not use for aerosols containing oil or in environments that are immediately dangerous to life or health (IDLH).
|
|
|
|
|
|
 |
|
3M5P71
3M Particulate Filter, P95
NIOSH approved for environments containing certain oil and non-oil based particles. Use with 3M™ Respirators 5000 Series or 3M™ Cartridges 6000 Series, and 3M™ Filter Retainer 501.
When properly fitted, use with appropriate cartridges for various applications including spray painting, lacquering, petrochemical and chemical manufacturing, pesticide spraying and agriculture for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. Do not use in environments that are immediately dangerous to life or health (IDLH).
|
|
|
|
|
|
 |
|
3M6001
3M Organic Vapor Cartridge
NIOSH approved against certain organic vapors. Use with 3M™ Half and Full Facepieces 6000 Series and 3M™ Half and Full Facepieces 7000 Series with bayonet style cartridge holders.
Use in a variety of workplace applications, including petrochemical, chemical manufacturing, construction, transportation and electronics. When properly fitted, helps provide respiratory protection from certain organic vapors at concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. Not for use in environments that are immediately dangerous to life or health (IDLH).
|
|
|
|
|
|
 |
|
3M6002
3M Acid Gas Cartridge
NIOSH approved against certain acid gases. Use with 3M™ Half and Full Facepieces 6000 Series and 3M™ Half and Full Facepieces 7000 Series with bayonet style cartridge holders.
Use in a variety of applications including chemical manufacturing, glass etching, pulp and paper, and laboratories. When properly fitted, helps provide respiratory protection from chlorine, hydrogen chloride, sulfur dioxide, or chlorine dioxide, or hydrogen sulfide (escape only) at concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. Not for use in environments that are immediately dangerous to life or health (IDLH).
|
|
|
|
|
|
 |
|
3M6003
3M Organic Vapor/Acid Gas Cartridge
NIOSH approved against certain organic vapors or acid gases. Use with 3M Half and Full Facepieces 6000 Series and 3M™ Half and Full Facepieces 7000 Series with bayonet style cartridge holders.
Use in a variety of applications, including pharmaceutical, petrochemical, utilities, aluminum reduction, chemical manufacturing, laboratories, and pulp and paper. When properly fitted, helps provide respiratory protection from certain organic vapors, chlorine, hydrogen chloride, sulfur dioxide, or hydrogen sulfide (escape only) or hydrogen fluoride at concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. Not for use in environments that are immediately dangerous to life or health (IDLH).
|
|
|
|
|
|
 |
|
3M6004
3M Ammonia Methylamine Cartridge
NIOSH approved against ammonia and methylamine. Use with 3M Half and Full Facepieces 6000 Series and 3M™ Half and Full Facepieces 7000 Series with bayonet style cartridge holders.
Use in a variety of applications including agriculture, chemical manufacturing, laboratories and the food industry. When properly fitted, helps provide respiratory protection from ammonia and methylamine at concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. Not for use in environments that are immediately dangerous to life or health (IDLH).
|
|
|
|
|
|
 |
|
3M6005
3M Formaldehyde/Organic Vapor Cartridge
NIOSH approved against formaldehyde and certain organic vapors. Use with 3M Half and Full Facepieces 6000 Series and 3M™ Half and Full Facepieces 7000 Series with bayonet style cartridge holders.
Use in a variety of applications, including laboratories, wood processing, carpet manufacturing, and primary metals manufacturing. When properly fitted, helps provide respiratory protection from formaldehyde and certain organic vapors at concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. Not for use in environments that are immediately dangerous to life or health (IDLH). OSHA requires that gas-proof goggles be worn with half facepiece respirators when used against formaldehyde.
|
|
|
|
|
|
 |
|
3M6006
3M™ Multi Gas/Vapor Cartridge
NIOSH approved against certain organic vapors, acid gases, ammonia, methylamine or formaldehyde. Use with 3M™ Half and Full Facepieces 6000 Series and 3M™ Half and Full Facepieces 7000 Series with bayonet style cartridge holders.
Use in a variety of applications, including petrochemical and chemical processing, utilities, pharmaceuticals, mining and primary metals. When properly fitted, helps provide respiratory protection from certain organic vapors, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide (escape only), ammonia, methylamine, formaldehyde or hydrogen fluoride at concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. Not for use in environments that are immediately dangerous to life or health (IDLH). OSHA requires that gas-proof goggles be worn with half facepiece respirators when used against formaldehyde.
|
|
|
|
|
|
